OWATROL COLD WELDING UNIVERSAL POLYESTER CEMENT COSMOFER IN DIFFERENT QUANTITIES 071AA/GB-073AA/GB

FEATURES

• COSMOFER® is a 2 pack universal polyester filler that can be applied to multiple surfaces – wood, metal, stone, concrete, plastic
• Quick drying and highly flexible COSMOFER® will not shrink or crack and when fully cured can be cut, screwed, drilled and tapped
• Easy to sand, COSMOFER® is compatible with any single or two pack finish
• Basic uses 
  • Interior and exterior
  • Horizontal and vertical
  • Wood - All types
  • Ferrous and non-ferrous metals - Iron, Steel, Aluminium, Copper, Lead
  • Plastics - ABS, Polyester, PVC
  • Stone, Concrete, Mosaic, Marble, Fibre cement
• Application areas:
  • AUTO / MOBILE HOME: Rust holes, torn metal, big cavity holes, dents, cracks, housing, reservoir, radiator
  • CARAVAN: body repair, waterproofing. MOTORBIKE : fairing, helmet, tank, sump
  • MOTO : fairing, helmet, reservoir, crank case
  • MARINE: hull and decks of wooden, metal or GRP boats, protects against corrosion
  • CONSTRUCTION: sealing cracks in concrete, brick, cinder block, leaks in metal tanks, concrete or GRP lining
  • DIY: Repair rigid plastic objects, PVC, GRP, ABS
  • ELECTRICITY: all insulations (12,000 volts / mm), battery tray
  • AGRICULTURE: tanks, troughs, barrels, buckets, tractor and agricultural machinery
  • CENTRAL HEATING: pipes, radiators, boiler, pump, thermal insulation
  • PLUMBING: supply pipes and drainage, fittings, drains, wash basin, sink, bath
  • COVERAGE: roofs, downpipes, gutter, frames, skylights
  • HARDWARE: iron gate, door, metal shutters, wrought iron
  • FOUNDRY: blowholes, defective castings, moldings

SPECIFICATIONS

• Color: White
• Binder: Polyester Resin
• Catalyst: Benzoyl Peroxide
• Storage: 12 months
• Quantity: 250g, 1000g

• Mixing:
  • Add 2% of hardener to quantity of filler for 10 minutes drying
  • As a guide 1 coffee bean size of hardener to 1 Chestnut size of filler
  • Cold weather increase amount of hardener
  • Hot weather decrease amount of hardener
  • Ensure hardener and filler are well mixed
  • Increasing or decreasing the amount of hardener does not affect the overall curing time
• Application:
  • Work filler in to crack, hole or dent
  • Smooth off with filling knife
  • For repairs deeper than 50 mm – build up in layers allowing too dry between applications
  • For a smooth finish sand (100 grit paper) before applying finish
  • Allow 24 hrs before machining (Drilling, Mechanically Sanding, Tapping…)